ATG12CN-S日本東日轉矩量?jī)x

ATG/BTG Torque Gauge
Direction
  
   
  For measurement of micro torquecalibration of torque tools.  
     
 
ATG/BTG Torque Gauge  
Complimentary Products
TGTCL TGTCL Calibration Kit for ATG/ BTG
 
  Select proper model according to unit of measure as following color code :  
 
S.I. =     Metric =     American =  
Accuracy ±2%
  
 
Model Torque Range Overall Lgth. Outside Diameter Chuck Grip Weight Approx
S.I. Metric American Min.-Max. Graduation
S.I. Metric American S.I. Metric American mm in. mm in. mm in. kg oz.
ATG045CN 45ATG ATG06Z cN.m 0.05-0.45 gf.cm 5-45 in.oz 0.06-0.60 cN.m 0.01 gf.cm 1 in.oz 0.01 90

3- 7/8

 43.5 1 23/32 ø1 ~ ø6.5 3/64 ~ 1/4 0.18 6 3/8
ATG09CN-S 90ATG-S ATG1.5Z-S 0.1-0.9 10-90 0.2-1.5 0.02 2 0.02
ATG1.5CN-S 150ATG-S ATG2.4Z-S 0.2-1.5 20-150 0.3-2.4 0.05
ATG3CN-S 300ATG-S ATG4.5Z-S 0.3-3 30-300 0.5-4.5 0.05 5 0.1
ATG6CN-S 600ATG-S ATG9Z-S 0.6-6 60-600 1-9 0.1 10 0.2
ATG12CN-S 1200ATG-S ATG18Z-S 1-12 100-1200 2-18 0.2 20 0.5
ATG24CN-S 2400ATG-S ATG36Z-S 3-24 300-2400 4-36 0.5 50
- - BTG60Z-S - - 6-60 - - 1 118 5 9/32 64.2 2 17/32 ø1 ~ ø8.5 3/64 ~ 11/32 0.52 18 3/8
BTG120Z-S 10-120 2
BTG15CN-S 1.5BTG-S 1.5BTG-A-S 2-15 kgf.cm 0.2-1.5 in.lbs 0.1-1.5 0.2 kgf.cm 0.02 in.lbs 0.02
BTG24CN-S 2.4BTG-S 2.4BTG-A-S 3-24 0.3-2.4 0.3-2.4 0.5 0.05
BTG36CN-S 3.6BTG-S 3.6BTG-A-S 4-36 0.4-3.6 0.4-3.6 0.05
BTG60CN-S 6BTG-S 6BTG-A-S 6-60 0.6-6 0.6-6 1 0.1 0.1
BTG90CN-S 9BTG-S 9BTG-A-S 10-90 1-9 1-9
BTG150CN-S 15BTG-S 15BTG-A-S 20-150 2-15 2-15 2 0.2 0.2
 
  Notes  
 
  1. Memory pointer on sideon top of dial face (not shown in picture)are standard
  2. ATG-S overall length with top pointer is 4-1/16"
  3. ATG045CN, 45ATGATG06Z are provided without side or top memory pointer due to very low torque value.
  4. ATG now provided with aluminum chuck as standard. All plastic or all steel chuck can be ordered separately. (Plastic chuck is shown in the photo above)

ATG6CN-S日本東日轉矩量?jī)x

ATG/BTG Torque Gauge
Direction
  
   
  For measurement of micro torquecalibration of torque tools.  
     
 
ATG/BTG Torque Gauge  
Complimentary Products
TGTCL TGTCL Calibration Kit for ATG/ BTG
 
  Select proper model according to unit of measure as following color code :  
 
S.I. =     Metric =     American =  
Accuracy ±2%
  
 
Model Torque Range Overall Lgth. Outside Diameter Chuck Grip Weight Approx
S.I. Metric American Min.-Max. Graduation
S.I. Metric American S.I. Metric American mm in. mm in. mm in. kg oz.
ATG045CN 45ATG ATG06Z cN.m 0.05-0.45 gf.cm 5-45 in.oz 0.06-0.60 cN.m 0.01 gf.cm 1 in.oz 0.01 90

3- 7/8

 43.5 1 23/32 ø1 ~ ø6.5 3/64 ~ 1/4 0.18 6 3/8
ATG09CN-S 90ATG-S ATG1.5Z-S 0.1-0.9 10-90 0.2-1.5 0.02 2 0.02
ATG1.5CN-S 150ATG-S ATG2.4Z-S 0.2-1.5 20-150 0.3-2.4 0.05
ATG3CN-S 300ATG-S ATG4.5Z-S 0.3-3 30-300 0.5-4.5 0.05 5 0.1
ATG6CN-S 600ATG-S ATG9Z-S 0.6-6 60-600 1-9 0.1 10 0.2
ATG12CN-S 1200ATG-S ATG18Z-S 1-12 100-1200 2-18 0.2 20 0.5
ATG24CN-S 2400ATG-S ATG36Z-S 3-24 300-2400 4-36 0.5 50
- - BTG60Z-S - - 6-60 - - 1 118 5 9/32 64.2 2 17/32 ø1 ~ ø8.5 3/64 ~ 11/32 0.52 18 3/8
BTG120Z-S 10-120 2
BTG15CN-S 1.5BTG-S 1.5BTG-A-S 2-15 kgf.cm 0.2-1.5 in.lbs 0.1-1.5 0.2 kgf.cm 0.02 in.lbs 0.02
BTG24CN-S 2.4BTG-S 2.4BTG-A-S 3-24 0.3-2.4 0.3-2.4 0.5 0.05
BTG36CN-S 3.6BTG-S 3.6BTG-A-S 4-36 0.4-3.6 0.4-3.6 0.05
BTG60CN-S 6BTG-S 6BTG-A-S 6-60 0.6-6 0.6-6 1 0.1 0.1
BTG90CN-S 9BTG-S 9BTG-A-S 10-90 1-9 1-9
BTG150CN-S 15BTG-S 15BTG-A-S 20-150 2-15 2-15 2 0.2 0.2
 
  Notes  
 
  1. Memory pointer on sideon top of dial face (not shown in picture)are standard
  2. ATG-S overall length with top pointer is 4-1/16"
  3. ATG045CN, 45ATGATG06Z are provided without side or top memory pointer due to very low torque value.
  4. ATG now provided with aluminum chuck as standard. All plastic or all steel chuck can be ordered separately. (Plastic chuck is shown in the photo above)

ATG3CN-S日本東日轉矩量?jī)x

ATG/BTG Torque Gauge
Direction
  
   
  For measurement of micro torquecalibration of torque tools.  
     
 
ATG/BTG Torque Gauge  
Complimentary Products
TGTCL TGTCL Calibration Kit for ATG/ BTG
 
  Select proper model according to unit of measure as following color code :  
 
S.I. =     Metric =     American =  
Accuracy ±2%
  
 
Model Torque Range Overall Lgth. Outside Diameter Chuck Grip Weight Approx
S.I. Metric American Min.-Max. Graduation
S.I. Metric American S.I. Metric American mm in. mm in. mm in. kg oz.
ATG045CN 45ATG ATG06Z cN.m 0.05-0.45 gf.cm 5-45 in.oz 0.06-0.60 cN.m 0.01 gf.cm 1 in.oz 0.01 90

3- 7/8

 43.5 1 23/32 ø1 ~ ø6.5 3/64 ~ 1/4 0.18 6 3/8
ATG09CN-S 90ATG-S ATG1.5Z-S 0.1-0.9 10-90 0.2-1.5 0.02 2 0.02
ATG1.5CN-S 150ATG-S ATG2.4Z-S 0.2-1.5 20-150 0.3-2.4 0.05
ATG3CN-S 300ATG-S ATG4.5Z-S 0.3-3 30-300 0.5-4.5 0.05 5 0.1
ATG6CN-S 600ATG-S ATG9Z-S 0.6-6 60-600 1-9 0.1 10 0.2
ATG12CN-S 1200ATG-S ATG18Z-S 1-12 100-1200 2-18 0.2 20 0.5
ATG24CN-S 2400ATG-S ATG36Z-S 3-24 300-2400 4-36 0.5 50
- - BTG60Z-S - - 6-60 - - 1 118 5 9/32 64.2 2 17/32 ø1 ~ ø8.5 3/64 ~ 11/32 0.52 18 3/8
BTG120Z-S 10-120 2
BTG15CN-S 1.5BTG-S 1.5BTG-A-S 2-15 kgf.cm 0.2-1.5 in.lbs 0.1-1.5 0.2 kgf.cm 0.02 in.lbs 0.02
BTG24CN-S 2.4BTG-S 2.4BTG-A-S 3-24 0.3-2.4 0.3-2.4 0.5 0.05
BTG36CN-S 3.6BTG-S 3.6BTG-A-S 4-36 0.4-3.6 0.4-3.6 0.05
BTG60CN-S 6BTG-S 6BTG-A-S 6-60 0.6-6 0.6-6 1 0.1 0.1
BTG90CN-S 9BTG-S 9BTG-A-S 10-90 1-9 1-9
BTG150CN-S 15BTG-S 15BTG-A-S 20-150 2-15 2-15 2 0.2 0.2
 
  Notes  
 
  1. Memory pointer on sideon top of dial face (not shown in picture)are standard
  2. ATG-S overall length with top pointer is 4-1/16"
  3. ATG045CN, 45ATGATG06Z are provided without side or top memory pointer due to very low torque value.
  4. ATG now provided with aluminum chuck as standard. All plastic or all steel chuck can be ordered separately. (Plastic chuck is shown in the photo above)

ATG1.5CN-S日本東日轉矩量?jī)x

ATG/BTG Torque Gauge
Direction
  
   
  For measurement of micro torquecalibration of torque tools.  
     
 
ATG/BTG Torque Gauge  
Complimentary Products
TGTCL TGTCL Calibration Kit for ATG/ BTG
 
  Select proper model according to unit of measure as following color code :  
 
S.I. =     Metric =     American =  
Accuracy ±2%
  
 
Model Torque Range Overall Lgth. Outside Diameter Chuck Grip Weight Approx
S.I. Metric American Min.-Max. Graduation
S.I. Metric American S.I. Metric American mm in. mm in. mm in. kg oz.
ATG045CN 45ATG ATG06Z cN.m 0.05-0.45 gf.cm 5-45 in.oz 0.06-0.60 cN.m 0.01 gf.cm 1 in.oz 0.01 90

3- 7/8

 43.5 1 23/32 ø1 ~ ø6.5 3/64 ~ 1/4 0.18 6 3/8
ATG09CN-S 90ATG-S ATG1.5Z-S 0.1-0.9 10-90 0.2-1.5 0.02 2 0.02
ATG1.5CN-S 150ATG-S ATG2.4Z-S 0.2-1.5 20-150 0.3-2.4 0.05
ATG3CN-S 300ATG-S ATG4.5Z-S 0.3-3 30-300 0.5-4.5 0.05 5 0.1
ATG6CN-S 600ATG-S ATG9Z-S 0.6-6 60-600 1-9 0.1 10 0.2
ATG12CN-S 1200ATG-S ATG18Z-S 1-12 100-1200 2-18 0.2 20 0.5
ATG24CN-S 2400ATG-S ATG36Z-S 3-24 300-2400 4-36 0.5 50
- - BTG60Z-S - - 6-60 - - 1 118 5 9/32 64.2 2 17/32 ø1 ~ ø8.5 3/64 ~ 11/32 0.52 18 3/8
BTG120Z-S 10-120 2
BTG15CN-S 1.5BTG-S 1.5BTG-A-S 2-15 kgf.cm 0.2-1.5 in.lbs 0.1-1.5 0.2 kgf.cm 0.02 in.lbs 0.02
BTG24CN-S 2.4BTG-S 2.4BTG-A-S 3-24 0.3-2.4 0.3-2.4 0.5 0.05
BTG36CN-S 3.6BTG-S 3.6BTG-A-S 4-36 0.4-3.6 0.4-3.6 0.05
BTG60CN-S 6BTG-S 6BTG-A-S 6-60 0.6-6 0.6-6 1 0.1 0.1
BTG90CN-S 9BTG-S 9BTG-A-S 10-90 1-9 1-9
BTG150CN-S 15BTG-S 15BTG-A-S 20-150 2-15 2-15 2 0.2 0.2
 
  Notes  
 
  1. Memory pointer on sideon top of dial face (not shown in picture)are standard
  2. ATG-S overall length with top pointer is 4-1/16"
  3. ATG045CN, 45ATGATG06Z are provided without side or top memory pointer due to very low torque value.
  4. ATG now provided with aluminum chuck as standard. All plastic or all steel chuck can be ordered separately. (Plastic chuck is shown in the photo above)

ATG09CN-S日本東日轉矩量?jī)x

ATG/BTG Torque Gauge
Direction
  
   
  For measurement of micro torquecalibration of torque tools.  
     
 
ATG/BTG Torque Gauge  
Complimentary Products
TGTCL TGTCL Calibration Kit for ATG/ BTG
 
  Select proper model according to unit of measure as following color code :  
 
S.I. =     Metric =     American =  
Accuracy ±2%
  
 
Model Torque Range Overall Lgth. Outside Diameter Chuck Grip Weight Approx
S.I. Metric American Min.-Max. Graduation
S.I. Metric American S.I. Metric American mm in. mm in. mm in. kg oz.
ATG045CN 45ATG ATG06Z cN.m 0.05-0.45 gf.cm 5-45 in.oz 0.06-0.60 cN.m 0.01 gf.cm 1 in.oz 0.01 90

3- 7/8

 43.5 1 23/32 ø1 ~ ø6.5 3/64 ~ 1/4 0.18 6 3/8
ATG09CN-S 90ATG-S ATG1.5Z-S 0.1-0.9 10-90 0.2-1.5 0.02 2 0.02
ATG1.5CN-S 150ATG-S ATG2.4Z-S 0.2-1.5 20-150 0.3-2.4 0.05
ATG3CN-S 300ATG-S ATG4.5Z-S 0.3-3 30-300 0.5-4.5 0.05 5 0.1
ATG6CN-S 600ATG-S ATG9Z-S 0.6-6 60-600 1-9 0.1 10 0.2
ATG12CN-S 1200ATG-S ATG18Z-S 1-12 100-1200 2-18 0.2 20 0.5
ATG24CN-S 2400ATG-S ATG36Z-S 3-24 300-2400 4-36 0.5 50
- - BTG60Z-S - - 6-60 - - 1 118 5 9/32 64.2 2 17/32 ø1 ~ ø8.5 3/64 ~ 11/32 0.52 18 3/8
BTG120Z-S 10-120 2
BTG15CN-S 1.5BTG-S 1.5BTG-A-S 2-15 kgf.cm 0.2-1.5 in.lbs 0.1-1.5 0.2 kgf.cm 0.02 in.lbs 0.02
BTG24CN-S 2.4BTG-S 2.4BTG-A-S 3-24 0.3-2.4 0.3-2.4 0.5 0.05
BTG36CN-S 3.6BTG-S 3.6BTG-A-S 4-36 0.4-3.6 0.4-3.6 0.05
BTG60CN-S 6BTG-S 6BTG-A-S 6-60 0.6-6 0.6-6 1 0.1 0.1
BTG90CN-S 9BTG-S 9BTG-A-S 10-90 1-9 1-9
BTG150CN-S 15BTG-S 15BTG-A-S 20-150 2-15 2-15 2 0.2 0.2
 
  Notes  
 
  1. Memory pointer on sideon top of dial face (not shown in picture)are standard
  2. ATG-S overall length with top pointer is 4-1/16"
  3. ATG045CN, 45ATGATG06Z are provided without side or top memory pointer due to very low torque value.
  4. ATG now provided with aluminum chuck as standard. All plastic or all steel chuck can be ordered separately. (Plastic chuck is shown in the photo above)

ATG045CN日本東日轉矩量?jī)x

ATG/BTG Torque Gauge
Direction
  
   
  For measurement of micro torquecalibration of torque tools.  
     
 
ATG/BTG Torque Gauge  
Complimentary Products
TGTCL TGTCL Calibration Kit for ATG/ BTG
 
  Select proper model according to unit of measure as following color code :  
 
S.I. =     Metric =     American =  
Accuracy ±2%
  
 
Model Torque Range Overall Lgth. Outside Diameter Chuck Grip Weight Approx
S.I. Metric American Min.-Max. Graduation
S.I. Metric American S.I. Metric American mm in. mm in. mm in. kg oz.
ATG045CN 45ATG ATG06Z cN.m 0.05-0.45 gf.cm 5-45 in.oz 0.06-0.60 cN.m 0.01 gf.cm 1 in.oz 0.01 90

3- 7/8

 43.5 1 23/32 ø1 ~ ø6.5 3/64 ~ 1/4 0.18 6 3/8
ATG09CN-S 90ATG-S ATG1.5Z-S 0.1-0.9 10-90 0.2-1.5 0.02 2 0.02
ATG1.5CN-S 150ATG-S ATG2.4Z-S 0.2-1.5 20-150 0.3-2.4 0.05
ATG3CN-S 300ATG-S ATG4.5Z-S 0.3-3 30-300 0.5-4.5 0.05 5 0.1
ATG6CN-S 600ATG-S ATG9Z-S 0.6-6 60-600 1-9 0.1 10 0.2
ATG12CN-S 1200ATG-S ATG18Z-S 1-12 100-1200 2-18 0.2 20 0.5
ATG24CN-S 2400ATG-S ATG36Z-S 3-24 300-2400 4-36 0.5 50
- - BTG60Z-S - - 6-60 - - 1 118 5 9/32 64.2 2 17/32 ø1 ~ ø8.5 3/64 ~ 11/32 0.52 18 3/8
BTG120Z-S 10-120 2
BTG15CN-S 1.5BTG-S 1.5BTG-A-S 2-15 kgf.cm 0.2-1.5 in.lbs 0.1-1.5 0.2 kgf.cm 0.02 in.lbs 0.02
BTG24CN-S 2.4BTG-S 2.4BTG-A-S 3-24 0.3-2.4 0.3-2.4 0.5 0.05
BTG36CN-S 3.6BTG-S 3.6BTG-A-S 4-36 0.4-3.6 0.4-3.6 0.05
BTG60CN-S 6BTG-S 6BTG-A-S 6-60 0.6-6 0.6-6 1 0.1 0.1
BTG90CN-S 9BTG-S 9BTG-A-S 10-90 1-9 1-9
BTG150CN-S 15BTG-S 15BTG-A-S 20-150 2-15 2-15 2 0.2 0.2
 
  Notes  
 
  1. Memory pointer on sideon top of dial face (not shown in picture)are standard
  2. ATG-S overall length with top pointer is 4-1/16"
  3. ATG045CN, 45ATGATG06Z are provided without side or top memory pointer due to very low torque value.
  4. ATG now provided with aluminum chuck as standard. All plastic or all steel chuck can be ordered separately. (Plastic chuck is shown in the photo above)

BTG60CN-S日本東日轉矩量?jī)x

ATG/BTG Torque Gauge
Direction
  
   
  For measurement of micro torquecalibration of torque tools.  
     
 
ATG/BTG Torque Gauge  
Complimentary Products
TGTCL TGTCL Calibration Kit for ATG/ BTG
 
  Select proper model according to unit of measure as following color code :  
 
S.I. =     Metric =     American =  
Accuracy ±2%
  
 
Model Torque Range Overall Lgth. Outside Diameter Chuck Grip Weight Approx
S.I. Metric American Min.-Max. Graduation
S.I. Metric American S.I. Metric American mm in. mm in. mm in. kg oz.
ATG045CN 45ATG ATG06Z cN.m 0.05-0.45 gf.cm 5-45 in.oz 0.06-0.60 cN.m 0.01 gf.cm 1 in.oz 0.01 90

3- 7/8

 43.5 1 23/32 ø1 ~ ø6.5 3/64 ~ 1/4 0.18 6 3/8
ATG09CN-S 90ATG-S ATG1.5Z-S 0.1-0.9 10-90 0.2-1.5 0.02 2 0.02
ATG1.5CN-S 150ATG-S ATG2.4Z-S 0.2-1.5 20-150 0.3-2.4 0.05
ATG3CN-S 300ATG-S ATG4.5Z-S 0.3-3 30-300 0.5-4.5 0.05 5 0.1
ATG6CN-S 600ATG-S ATG9Z-S 0.6-6 60-600 1-9 0.1 10 0.2
ATG12CN-S 1200ATG-S ATG18Z-S 1-12 100-1200 2-18 0.2 20 0.5
ATG24CN-S 2400ATG-S ATG36Z-S 3-24 300-2400 4-36 0.5 50
- - BTG60Z-S - - 6-60 - - 1 118 5 9/32 64.2 2 17/32 ø1 ~ ø8.5 3/64 ~ 11/32 0.52 18 3/8
BTG120Z-S 10-120 2
BTG15CN-S 1.5BTG-S 1.5BTG-A-S 2-15 kgf.cm 0.2-1.5 in.lbs 0.1-1.5 0.2 kgf.cm 0.02 in.lbs 0.02
BTG24CN-S 2.4BTG-S 2.4BTG-A-S 3-24 0.3-2.4 0.3-2.4 0.5 0.05
BTG36CN-S 3.6BTG-S 3.6BTG-A-S 4-36 0.4-3.6 0.4-3.6 0.05
BTG60CN-S 6BTG-S 6BTG-A-S 6-60 0.6-6 0.6-6 1 0.1 0.1
BTG90CN-S 9BTG-S 9BTG-A-S 10-90 1-9 1-9
BTG150CN-S 15BTG-S 15BTG-A-S 20-150 2-15 2-15 2 0.2 0.2
 
  Notes  
 
  1. Memory pointer on sideon top of dial face (not shown in picture)are standard
  2. ATG-S overall length with top pointer is 4-1/16"
  3. ATG045CN, 45ATGATG06Z are provided without side or top memory pointer due to very low torque value.
  4. ATG now provided with aluminum chuck as standard. All plastic or all steel chuck can be ordered separately. (Plastic chuck is shown in the photo above)

BTG36N-S日本東日轉矩量?jī)x

ATG/BTG Torque Gauge
Direction
  
   
  For measurement of micro torquecalibration of torque tools.  
     
 
ATG/BTG Torque Gauge  
Complimentary Products
TGTCL TGTCL Calibration Kit for ATG/ BTG
 
  Select proper model according to unit of measure as following color code :  
 
S.I. =     Metric =     American =  
Accuracy ±2%
  
 
Model Torque Range Overall Lgth. Outside Diameter Chuck Grip Weight Approx
S.I. Metric American Min.-Max. Graduation
S.I. Metric American S.I. Metric American mm in. mm in. mm in. kg oz.
ATG045CN 45ATG ATG06Z cN.m 0.05-0.45 gf.cm 5-45 in.oz 0.06-0.60 cN.m 0.01 gf.cm 1 in.oz 0.01 90

3- 7/8

 43.5 1 23/32 ø1 ~ ø6.5 3/64 ~ 1/4 0.18 6 3/8
ATG09CN-S 90ATG-S ATG1.5Z-S 0.1-0.9 10-90 0.2-1.5 0.02 2 0.02
ATG1.5CN-S 150ATG-S ATG2.4Z-S 0.2-1.5 20-150 0.3-2.4 0.05
ATG3CN-S 300ATG-S ATG4.5Z-S 0.3-3 30-300 0.5-4.5 0.05 5 0.1
ATG6CN-S 600ATG-S ATG9Z-S 0.6-6 60-600 1-9 0.1 10 0.2
ATG12CN-S 1200ATG-S ATG18Z-S 1-12 100-1200 2-18 0.2 20 0.5
ATG24CN-S 2400ATG-S ATG36Z-S 3-24 300-2400 4-36 0.5 50
- - BTG60Z-S - - 6-60 - - 1 118 5 9/32 64.2 2 17/32 ø1 ~ ø8.5 3/64 ~ 11/32 0.52 18 3/8
BTG120Z-S 10-120 2
BTG15CN-S 1.5BTG-S 1.5BTG-A-S 2-15 kgf.cm 0.2-1.5 in.lbs 0.1-1.5 0.2 kgf.cm 0.02 in.lbs 0.02
BTG24CN-S 2.4BTG-S 2.4BTG-A-S 3-24 0.3-2.4 0.3-2.4 0.5 0.05
BTG36CN-S 3.6BTG-S 3.6BTG-A-S 4-36 0.4-3.6 0.4-3.6 0.05
BTG60CN-S 6BTG-S 6BTG-A-S 6-60 0.6-6 0.6-6 1 0.1 0.1
BTG90CN-S 9BTG-S 9BTG-A-S 10-90 1-9 1-9
BTG150CN-S 15BTG-S 15BTG-A-S 20-150 2-15 2-15 2 0.2 0.2
 
  Notes  
 
  1. Memory pointer on sideon top of dial face (not shown in picture)are standard
  2. ATG-S overall length with top pointer is 4-1/16"
  3. ATG045CN, 45ATGATG06Z are provided without side or top memory pointer due to very low torque value.
  4. ATG now provided with aluminum chuck as standard. All plastic or all steel chuck can be ordered separately. (Plastic chuck is shown in the photo above)

BTG15CN-S日本東日轉矩量?jī)x

ATG/BTG Torque Gauge
Direction
  
   
  For measurement of micro torquecalibration of torque tools.  
     
 
ATG/BTG Torque Gauge  
Complimentary Products
TGTCL TGTCL Calibration Kit for ATG/ BTG
 
  Select proper model according to unit of measure as following color code :  
 
S.I. =     Metric =     American =  
Accuracy ±2%
  
 
Model Torque Range Overall Lgth. Outside Diameter Chuck Grip Weight Approx
S.I. Metric American Min.-Max. Graduation
S.I. Metric American S.I. Metric American mm in. mm in. mm in. kg oz.
ATG045CN 45ATG ATG06Z cN.m 0.05-0.45 gf.cm 5-45 in.oz 0.06-0.60 cN.m 0.01 gf.cm 1 in.oz 0.01 90

3- 7/8

 43.5 1 23/32 ø1 ~ ø6.5 3/64 ~ 1/4 0.18 6 3/8
ATG09CN-S 90ATG-S ATG1.5Z-S 0.1-0.9 10-90 0.2-1.5 0.02 2 0.02
ATG1.5CN-S 150ATG-S ATG2.4Z-S 0.2-1.5 20-150 0.3-2.4 0.05
ATG3CN-S 300ATG-S ATG4.5Z-S 0.3-3 30-300 0.5-4.5 0.05 5 0.1
ATG6CN-S 600ATG-S ATG9Z-S 0.6-6 60-600 1-9 0.1 10 0.2
ATG12CN-S 1200ATG-S ATG18Z-S 1-12 100-1200 2-18 0.2 20 0.5
ATG24CN-S 2400ATG-S ATG36Z-S 3-24 300-2400 4-36 0.5 50
- - BTG60Z-S - - 6-60 - - 1 118 5 9/32 64.2 2 17/32 ø1 ~ ø8.5 3/64 ~ 11/32 0.52 18 3/8
BTG120Z-S 10-120 2
BTG15CN-S 1.5BTG-S 1.5BTG-A-S 2-15 kgf.cm 0.2-1.5 in.lbs 0.1-1.5 0.2 kgf.cm 0.02 in.lbs 0.02
BTG24CN-S 2.4BTG-S 2.4BTG-A-S 3-24 0.3-2.4 0.3-2.4 0.5 0.05
BTG36CN-S 3.6BTG-S 3.6BTG-A-S 4-36 0.4-3.6 0.4-3.6 0.05
BTG60CN-S 6BTG-S 6BTG-A-S 6-60 0.6-6 0.6-6 1 0.1 0.1
BTG90CN-S 9BTG-S 9BTG-A-S 10-90 1-9 1-9
BTG150CN-S 15BTG-S 15BTG-A-S 20-150 2-15 2-15 2 0.2 0.2
 
  Notes  
 
  1. Memory pointer on sideon top of dial face (not shown in picture)are standard
  2. ATG-S overall length with top pointer is 4-1/16"
  3. ATG045CN, 45ATGATG06Z are provided without side or top memory pointer due to very low torque value.
  4. ATG now provided with aluminum chuck as standard. All plastic or all steel chuck can be ordered separately. (Plastic chuck is shown in the photo above)

BTG150CN-S日本東日轉矩量?jī)x

ATG/BTG Torque Gauge
Direction
  
   
  For measurement of micro torquecalibration of torque tools.  
     
 
ATG/BTG Torque Gauge  
Complimentary Products
TGTCL TGTCL Calibration Kit for ATG/ BTG
 
  Select proper model according to unit of measure as following color code :  
 
S.I. =     Metric =     American =  
Accuracy ±2%
  
 
Model Torque Range Overall Lgth. Outside Diameter Chuck Grip Weight Approx
S.I. Metric American Min.-Max. Graduation
S.I. Metric American S.I. Metric American mm in. mm in. mm in. kg oz.
ATG045CN 45ATG ATG06Z cN.m 0.05-0.45 gf.cm 5-45 in.oz 0.06-0.60 cN.m 0.01 gf.cm 1 in.oz 0.01 90

3- 7/8

 43.5 1 23/32 ø1 ~ ø6.5 3/64 ~ 1/4 0.18 6 3/8
ATG09CN-S 90ATG-S ATG1.5Z-S 0.1-0.9 10-90 0.2-1.5 0.02 2 0.02
ATG1.5CN-S 150ATG-S ATG2.4Z-S 0.2-1.5 20-150 0.3-2.4 0.05
ATG3CN-S 300ATG-S ATG4.5Z-S 0.3-3 30-300 0.5-4.5 0.05 5 0.1
ATG6CN-S 600ATG-S ATG9Z-S 0.6-6 60-600 1-9 0.1 10 0.2
ATG12CN-S 1200ATG-S ATG18Z-S 1-12 100-1200 2-18 0.2 20 0.5
ATG24CN-S 2400ATG-S ATG36Z-S 3-24 300-2400 4-36 0.5 50
- - BTG60Z-S - - 6-60 - - 1 118 5 9/32 64.2 2 17/32 ø1 ~ ø8.5 3/64 ~ 11/32 0.52 18 3/8
BTG120Z-S 10-120 2
BTG15CN-S 1.5BTG-S 1.5BTG-A-S 2-15 kgf.cm 0.2-1.5 in.lbs 0.1-1.5 0.2 kgf.cm 0.02 in.lbs 0.02
BTG24CN-S 2.4BTG-S 2.4BTG-A-S 3-24 0.3-2.4 0.3-2.4 0.5 0.05
BTG36CN-S 3.6BTG-S 3.6BTG-A-S 4-36 0.4-3.6 0.4-3.6 0.05
BTG60CN-S 6BTG-S 6BTG-A-S 6-60 0.6-6 0.6-6 1 0.1 0.1
BTG90CN-S 9BTG-S 9BTG-A-S 10-90 1-9 1-9
BTG150CN-S 15BTG-S 15BTG-A-S 20-150 2-15 2-15 2 0.2 0.2
 
  Notes  
 
  1. Memory pointer on sideon top of dial face (not shown in picture)are standard
  2. ATG-S overall length with top pointer is 4-1/16"
  3. ATG045CN, 45ATGATG06Z are provided without side or top memory pointer due to very low torque value.
  4. ATG now provided with aluminum chuck as standard. All plastic or all steel chuck can be ordered separately. (Plastic chuck is shown in the photo above)

最新產品

熱門儀器： 液相色譜儀 氣相色譜儀 原子熒光光譜儀 可見分光光度計 液質聯用儀 壓力試驗機 酸度計（PH計） 離心機 高速離心機 冷凍離心機 生物顯微鏡 金相顯微鏡 標準物質 生物試劑